Intended for the high horsepower street fan, the McLeod RST Street twin clutch kit is an economically priced twin disc clutch kit that does not require a dedicated flywheel( you use your existing flywheel) in most applications. Able to handle 800hp, this clutch can handle almost any horse-power you can throw at it and still remain streetable. Organic lined clutch discs will provide smooth ...
SOHC-Thumpr NSR (No Springs Required): Great idle with excellent power. Good mid-range torque and power gains above 4500 rpm. Compatible with stock valve springs, converter and gears; requires cam phaser upgrade and custom tuning. ...
EibachEibach
Anti Roll Kit, F/R (05-10) Mustang GT 4.6(05-10) Mustang GT 4.6 V8 ***Excludes GT500
Complete your suspension upgrade with an Eibach ANTI-ROLL-KIT. While our PRO-KIT and SPORTLINE spring sets are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your car's handling characteristics. Our ANTI-ROLL-KITs reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering ...
Valve Spring Retainer - 7 Degree - 0.630 in OD Step - 0.959 in Single Spring - Steel - Ford Modular - Set of ...
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into ...
Valve Spring - Performance Street - Beehive Spring - 191 lb/in Spring Rate - 0.952 in Coil Bind - 1.061 in OD - Set of ...
K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. ...
Brake Rotor - EradiSpeed + 2 - Rear - Directional / Drilled / Slotted - 14.000 in OD - 2 Piece - Iron - Natural - Ford Mustang 2005-13 - ...
Chassis Brace - Rear - 2 Point - Hardware Included - Steel - Silver Powder Coat - Ford Mustang 2005-14 - ...
Whiteline PerformanceWhiteline Performance
05-14 Mustang Watts Link
Watts Link - Bolt-On - Adjustable Roll Center - Silver Powder Coat - Ford Mustang 2005-14 - ...
The ACT Xtreme Twin Disc Clutch Kit offers enthusiasts a wide range of street-friendly to race-ready kits with torque capacities from 875 - 1470 lbs/ft of torque. All kits offer discs that have twice the surface area and wear for high heat capacity and long life, and include our proprietary precisionground floater lift system, which allows for adjustment to compensate for wear. Each kit offers a ...
Aeromotive’s Bolt-in systems are designed to provide the do it yourselfer with “ALL” the hardware and components necessary to properly install a “full-on” Aeromotive fuel system. If you are building a Mustang, check out our newly expanded Mustang systems, now including all 4.6 GT and Cobra platforms through 2004. If you’re building a bad street/strip car or ...
Many new Aeromotive Fuel Rails are now available as a fuel rail only kit, with high-flow fuel rail(s) and mounting hardware, or as complete bolt-on fuel rail systems. Systems are available for OEM return and returnless applications, and include everything needed for easy installation. Check out the new Ford 4.6L, 5.0L, 5.4L fuel rail systems, along with new fuel rail kits and systems for LS1 and ...
The importance of pressure plate bolts in a racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a ...
ARP's heat-treated 8740 chrome moly wheel studs are a much-needed replacement for any car engaged in oval track or drag racing competition. They have a tensile strength of 190,000 psi and are able to easily handle the tremendous acceleration shock loads (shear) and lateral forces (elongation) found in racing. The studs are sold in packs of 5 and are cadmium plated for extra durability. Nuts not ...
ARP's heat-treated 8740 chrome moly wheel studs are a much-needed replacement for any car engaged in oval track or drag racing competition. They have a tensile strength of 190,000 psi and are able to easily handle the tremendous acceleration shock loads (shear) and lateral forces (elongation) found in racing. The studs are sold in packs of 5 and are cadmium plated for extra durability. Nuts not ...
Advanced Clutch TechnologyAdvanced Clutch Technology
Clutch Kit - Heavy Duty (HD) ACTFM2-HDG6
When your engine puts out performance, you need a Clutch Kit that can handle it properly. All ACT Clutch Kits provide a generous increase in clamp load which directly increases torque capacity. ACT Clutch kits are offered in a number of configurations and there is one developed specifically for your vehicle. All ACT Clutch Kits include your choice of Pressure Plate, your choice of Clutch Disc, ...
Advanced Clutch TechnologyAdvanced Clutch Technology
Clutch Kit - Sport (SP) ACTFM5-SPSS
When your engine puts out performance, you need a Clutch Kit that can handle it properly. All ACT Clutch Kits provide a generous increase in clamp load which directly increases torque capacity. ACT Clutch kits are offered in a number of configurations and there is one developed specifically for your vehicle. All ACT Clutch Kits include your choice of Pressure Plate, your choice of Clutch Disc, ...
Advanced Clutch TechnologyAdvanced Clutch Technology
Clutch Kit - Xtreme Twin Disc ACTT2R-F04
The ACT Xtreme Twin Disc Clutch Kit offers enthusiasts a wide range of street-friendly to race-ready kits with torque capacities from 875 - 1470 lbs/ft of torque. All kits offer discs that have twice the surface area and wear for high heat capacity and long life, and include our proprietary precisionground floater lift system, which allows for adjustment to compensate for wear. Each kit offers a ...
Advanced Clutch TechnologyAdvanced Clutch Technology
Clutch Kit - Xtreme Twin Disc ACTT2S-F01
The ACT Xtreme Twin Disc Clutch Kit offers enthusiasts a wide range of street-friendly to race-ready kits with torque capacities from 875 - 1470 lbs/ft of torque. All kits offer discs that have twice the surface area and wear for high heat capacity and long life, and include our proprietary precisionground floater lift system, which allows for adjustment to compensate for wear. Each kit offers a ...
DeatschWerks has built the most comprehensive injector offering in the industry. The DW line-up covers high impedance, low impedance, GDI, EFI, side feed, and top feed. DW not only works directly with Bosch Performance to deliver a complete EV14 line up, but also offers Denso, SMP, JECS, and Delphi options. DW high flow fuel injectors are only offered in balanced sets processed through our ...
DeatschWerks Fuel Pump Installation Kits are designed for easy installation into your OE pump module. Each kit is developed in-house specifically for the application listed and includes everything needed for installation. Detailed step-by-step illustrated instructions are available for most popular applications. Only DeatschWerks goes to these great lengths to ensure easy fitment for the ...
COMP Cams XFI VSR (Valve Springs Required) XE253H-15 Camshaft Set for 4.6L and 5.4L SOHC Modular 3 Valve Ford for Blower Applications-Powerful mid-rpm range cam for bolt-on blowers at stock boost levels. Solid power gains above 4400 rpm, requires custom tuning. ...
Oil Pan Gasket - 1 Piece - Steel Core Silicone Rubber - Ford Modular - ...
Valve Spring - Race Street - Beehive Spring - 258 lb/in Spring Rate - 0.970 in Coil Bind - 1.101 in OD - Set of ...
Gauge Pod - Gauge Works - Two 2-1/16 in Diameter Gauges - Full Pillar - Plastic - Black - Hard Top - Ford Mustang 2005-09 - ...
Jba Performance ExhaustJba Performance Exhaust
Ignition Wires JBAW0675
JBA PowerCables™ ignition wires are less than half the resistance of most factory wires, which frees ...
K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. ...
The Pro Series oil filters are high quality mid-grade oil filters, co-labeled with the K&N and NASCAR logos. Complete with a fluted black canister, these oil filters are designed for removal using a traditional oil filter wrench. The newly engineered filter media is designed to exceed OE standards for filtration and flow, allowing for a high volume of clean oil to keep your engine well ...
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into ...
Baer Tracker adjustable tie rod ends are designed to help correct bump steer. ...
With three styles to choose from, rectangular, tubular and adjustable, you are sure to find the trailing arms that fit your ride. All trailing arms are powder-coasted gloss black for a long lasting finish. All upper tubular and lower rectangular trailing arms use polyurethane bushings on both ends, while upper adjustable and lower tubular trailing arms use a spherical ball or rod end assembly ...